文章詳目資料

防蝕工程 EIScopus

  • 加入收藏
  • 下載文章
篇名 聚乙二醇的添加對於鹼液中鋅的腐蝕行為影響研究
卷期 23:1、23:1
並列篇名 Effects of Polyethylene Glycol on the Corrosion of Zinc in Alkaline Media
作者 王志華洪耀宗
頁次 13-21
關鍵字 聚乙二醇保護效率交流阻抗Polyethylene glycolProtection efficiencyAC impedanceEI
出刊日期 200903

中文摘要

本文針對鋅在含聚乙二醇(PEG)之 8 M 氫氧化鉀溶液中的腐蝕行為進行研究。研究結果發現,平均分子量為 400 與 600 的聚乙二醇(PEG400 與 PEG600)皆可在極短時間內大幅降低鋅的腐蝕電流,而且 PEG600 的防蝕效果優於 PEG400。PEG400 或 PEG600 在 8 莫耳氫氧化鉀溶液中的適當添加重量百分比約為 0.2%。在初期的 10 天內,PEG600 對於鋅陽極的保護效率可高達 90%以上。當浸漬時間由 10 天延長為 30 天,PEG600 的保護效率會遽減約 16%。PEG 保護效率的變化與電化學交流阻抗測試以及表面顯微觀察的結果極為一致。

英文摘要

The electrochemical characteristics of zinc in 8 M KOH electrolytes containing polyethylene glycol (PEG) were investigated. It was found that PEG400 (PEG with an average molecular weight of 400 g/mol) as well as PEG600 could dramatically decrease the corrosion current of zinc
in extremely short time. In addition, the protection efficiency of PEG600 was superior to that of PEG400. The optimum concentration of either PEG400 or PEG600 addition in the 8M KOH electrolyte is around 0.2%. During the first ten days of storage, the PEG600 provided zinc with a
rather high protection efficiency of > 90% from corrosion. However, an abrupt drop of protection efficiency, about 16%, was observed when the storage time was extended to 30 days. This decline of protection efficiency of PEG was in agreement with the results derived from AC impedance measurements as well as morphological evaluations.

相關文獻