篇名 | 田口實驗設計於低碳鋼熱浸純鋁之應用 |
---|---|
卷期 | 11:1 |
並列篇名 | The Application of Hot Dipping Commercial Pure Aluminum onto Low Carbon Steel |
作者 | 洪舜立 、 王朝正 、 林坤正 |
頁次 | 001-007 |
關鍵字 | 熱浸鍍鋁 、 表面處理 、 合金化層 、 低碳鋼 、 田口式實驗設計法 、 Hot Dip Aluminum 、 Alloying Layer 、 Low Carbon Steel 、 Taguchi Experiment Design 、 Surface Treatment 、 EI |
出刊日期 | 199703 |
本研究以田口實驗計劃法針對熱浸時間、熱浸溫度、試片移出鋁湯速度及試片表面粗糙度等進行實驗規劃,以期對本系統之鍍鋁研究有一綜合性的結果。實驗結果顯示對合金化層厚度而言,「熱浸溫度」為顯著因子,其次是「熱浸時間J對外表鋁鑑層厚度而言,顯著因子為「熱浸時間J'至於試片移出鋁湯速度及試片表面粗糙度在本研究的操作條件下對合金化層厚度及外表鋁鍍層厚度的影響極微。
Taguchi Method was applied to explore aluminum hot dipping onto low carbon steel. Four hot dipping parameters (i.e. operating temperature, time, speed and surface roughness) were concerned. The results indicated that the hot dipping temperature and time are the dominant parameters of the aluminized layer thickness. Besides, the hot dipping time is the dominant parameter of the thickness of external aluminum layer on specimens also. However, the dipping speed and the surface roughness of specimens are not important parameters.