篇名 | 聚酯縫編不織布經阻燃撥水加工應用於汽車內飾 |
---|---|
卷期 | 26:1 |
並列篇名 | The Effectiveness of Flame Retardant and Water-repellent Treatment of Knitted Non-woven Polyester Fabric in Automotive interiors |
作者 | 邱靖淳 、 林永浩 |
頁次 | 052-062 |
關鍵字 | 聚酯縫編不織布 、 阻燃劑 、 撥水劑 、 汽車內飾 、 Knitted Non-woven Polyester Fabric 、 Flame Retardant 、 Water-Repellent 、 Automotive Interiors |
出刊日期 | 201912 |
本研究探討聚酯縫編不織布經阻燃撥水加工應用於汽車內飾之研究,本實驗使用阻燃劑濃度7%、8%、9%、10%和撥水劑濃度4%、5%、6%、7%、8%,撥水劑濃度在範圍內撥水評級均達到3級以上,而阻燃劑隨著濃度7%至10%,燃燒速率由168.7mm/min下降至79.0mm/min。水平燃燒以CNS13387制定之合格標準,燃燒速率不超過102mm/min即為合格,其撥水效果則以接觸角測試判斷與CNS10461噴灑試驗評級。
The aim of this research is to determine the effectiveness of flame retardant and water-repellent treatment of knitted non-woven polyester fabric in automotive interiors. This study tested fire retardant content ranges from 7 to 10% and water-repellent content ranges from 4 to 8%, respectively. The water repellency was classified as Grade 3 and above when 4 - 8% of water-repellent was applied. The burning rate has also decreased from 168.7 mm/min to 79.0 mm/min following 7 - 10% fire retardant treatment. The flammability test is considered pass with CNS13387 standard compliance, where the burning rate does not exceed 102mm/min. The water repellency test was determined according to contact angle assessment and CNS10461 standard spray test.